LS-2

Line Selector

LS-2
Onde Comprar

Simplifique seu Setup

O LS-2 facilita a mudança entre grupos de efeitos e amplificadores, encaminhando sinais de entrada e saída através de seus dois circuitos independentes, que podem ser combinados de seis modos diferentes. Conectado à uma fonte de alimentação original BOSS tipo PSA, o LS-2 fornece 9V DC para alimentação de até 5 pedais BOSS.

 

 
Nominal Input Level
-20 dBu
Input Impedance
1 M ohm
Nominal Output Level
-20 dBu
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Bypass
Buffered bypass
Controls
MODE selector switch
LEVEL knobs A/B
Pedal switch
Indicator
Line indicator A/B (Used for indication of check battery)
Connectors
INPUT jack: 1/4-inch phone type
SEND jacks A/B: 1/4-inch phone type
RETURN jacks A/B: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN/OUT jack
Power Supply
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw
30 mA
Expected battery life under continuous use
Carbon: Approx. 14.5 hours
Alkaline: Approx. 29.5 hours
* These figures will vary depending on the actual conditions of use.
Accessories
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22)
Options (sold separately)
AC adaptor: PSA series
Parallel DC Cord: PCS-20A
Size and Weight
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight (including battery)
430 g
1 lb
* 0 dBu = 0.775 Vrms
*The specifications are subject to change without notice.

Suporte

Se você tiver qualquer dúvida ao utilizar seu produto Roland ou BOSS, contate nosso Central de Ajuda.
Você também pode consultar nossa biblioteca de Manuais do Proprietário e Documentos de Suporte.

Manuais do Proprietário

Arquivos de Suporte