LS-2

Line Selector pedal

LS-2
Køb

Forenkler dit setup

Denne lette måde at skifte mellem flere effekter eller forstærkere på, eller route indgangs- og udgangssignaler. I forbindelse med en strømforsyning, kan LS-2 agere strømforsyning til flere BOSS pedaler.

Nominal Input Level
-20 dBu
Input Impedance
1 M ohm
Nominal Output Level
-20 dBu
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Bypass
Buffered bypass
Controls
MODE selector switch
LEVEL knobs A/B
Pedal switch
Indicator
Line indicator A/B (Used for indication of check battery)
Connectors
INPUT jack: 1/4-inch phone type
SEND jacks A/B: 1/4-inch phone type
RETURN jacks A/B: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN/OUT jack
Power Supply
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw
30 mA
Expected battery life under continuous use
Carbon: Approx. 14.5 hours
Alkaline: Approx. 29.5 hours
* These figures will vary depending on the actual conditions of use.
Accessories
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22)
Options (sold separately)
AC adaptor: PSA series
Parallel DC Cord: PCS-20A
Size and Weight
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight (including battery)
430 g
1 lb
* 0 dBu = 0.775 Vrms
*The specifications are subject to change without notice.

Downloads

Support

Hvis du har spørgsmål angående betjening af dit Bossprodukt, se venligst vores vidensdatabase for svar på de mest almindelige spørgsmål.
Du kan også kontakte vores produktsupport via telefon eller email.
Yderligere har vi også brugermanualer og supportdokumenter som du kan downloade.

Brugermanualer

Supportdokumenter