LS-2

Line Selector

LS-2

Memudahkan Setup Anda

 

Pedal Line Selector mewakili cara mudah untuk memilih settingan di beberapa efek atau amplifier, atau untuk rute signal input dan output. Dua line loop dan 6 mode looping menyediakan berbagai macam variasi aplikasi yang luas.
 

Nominal Input Level
-20 dBu
Input Impedance
1 M ohm
Nominal Output Level
-20 dBu
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Bypass
Buffered bypass
Controls
MODE selector switch
LEVEL knobs A/B
Pedal switch
Indicator
Line indicator A/B (Used for indication of check battery)
Connectors
INPUT jack: 1/4-inch phone type
SEND jacks A/B: 1/4-inch phone type
RETURN jacks A/B: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN/OUT jack
Power Supply
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw
30 mA
Expected battery life under continuous use
Carbon: Approx. 14.5 hours
Alkaline: Approx. 29.5 hours
* These figures will vary depending on the actual conditions of use.
Accessories
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22)
Options (sold separately)
AC adaptor: PSA series
Parallel DC Cord: PCS-20A
Size and Weight
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight (including battery)
430 g
1 lb
* 0 dBu = 0.775 Vrms
*The specifications are subject to change without notice.

Downloads

Support

If you have questions about operating your BOSS product, please check our Knowledge Base for answers to the most common questions.
You can also contact our Product Support department by phone or email.
In addition, we have a library of Owner’s Manuals and Support Documents that you can download and reference.