GX-100 System Program (Ver.2.03) HOW TO KNOW THE VERSION Before you start, check the system program version of your GX-100. Turn on the power. The version information appears in the lower right corner of the startup display. If this shows the latest version (Version 2.03 or later), there's no need to update your GX-100. After verifying the displayed version, turn off the power. UPDATE HISTORY [ Ver.2.03 ] DEC 2024 Bug Fix The following bug was fixed. Under certain conditions, Carryover does not work. [ Ver.2.02 ] NOV 2024 Functionality Improvement Operating stability has been enhanced. [ Ver.2.01 ] OCT 2024 Bug Fixes The following bugs were fixed. IR loaded on some USER area in SPEAKER TYPE does not sound. Depending on AMP TYPE, noise occurs when switching a memory. Depending on AMP TYPE, SOLO SW sometimes does not work as desired. [ Ver.2.00 ] SEP 2024 Additional Functions 3 original BOSS high-gain amp types have been added to AIRD PREAMP. X-ULTRA X-OPTIMA X-TITAN 6 types of bass amps have been added to AIRD BASS PREAMP. STUDIO BASS SILVER TUBE CLASSIC BLUE SOLID STACK FAT TUBE DARK DRV 4 types of microphones have been added to AIRD PREAMP and AIRD BASS PREAMP. RBN121 BLEND A BLEND B BLEND C 7 types of effects have been added. SD-1 DS-1 SLICER HUMANIZER FEEDBACKER SITAR SIM AUTO WAH Preset patches that use the new types above have been added in P04-1 through P05-4. Please refer to the "GX-100 Parameter Guide" info in the [ Owner's Manuals ]. Functionality Improvements Memory name is displayed in Play Screen when Control Mode view. When changing BANK(in WAIT1 or WAIT 2 mode), the memory name and the BANK number are displayed as destination. COLOR MODE has been added to HARDWARE SETTINGS. The default value for Auto Off has been changed to 20 minutes. *For information on the function, please refer to the[ Owner's Manuals ] . [ Ver.1.13 ] DEC 2023 Bug Fixes The following bugs were fixed. ASSIGN PC cannot be sent to more than one MIDI channel. When FUNCTION is OFF and MODE is MOMENT, PEDAL LED does not light up correctly. USB connection with BTS on Mac sometimes could not be established. When connecting to BTS, TUNER view sometimes does not appear correctly. TUNER view is not shown correctly after showing POPUP. [ Ver.1.12 ] JUN 2023 Bug Fixes Bugs are fixed depending on amp settings when switching memory. [ Ver.1.11 ] MAY 2022 Functionality Improvement Operating stability has been enhanced. [ Ver.1.10 ] MAR 2022 Additional Function BOSS TONE STUDIO for GX-100 is now supported. WHAT YOU WILL NEED TO UPDATE YOUR GX-100 GX-100 USB cable * The update is carried out with the unit and the computer connected via USB. Provide a cable suitable for connection to the computer you're using. Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 CAUTION WHEN PERFORMING THE UPDATE If you update on the normal mode of GX-100 against the correct procedure, this update data may destroy the system program. Never power-off your GX-100 while the update is in progress! If a power failure or similar accident occurs during the update process, the GX-100 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs. We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document. PROCEDURE FOR THE UPDATE Hold down [ WRITE ] button and turn on the power. * Continue to hold down WRITE until "GX-100 Updater" appears on the display. Connect the computer to the GX-100's USB port by a USB cable. Open the "GX-100" drive folder in your personal computer. With Windows Within My Computer (or Computer), open "GX-100" (or Removable Disk). With macOS On the desktop, open the "GX-100" icon. Download the file named "gx100_sys_v203.zip". Please open/extract the downloaded "gx100_sys_v203.zip" file on your computer to get the update file in the "gx100_sys_v203" folder. Copy (drag and drop) all files in the "gx100_sys_v203" folder into the root directory of the "GX-100" drive. After the copy has been completed, unmount or remove the drive on your computer. With Windows Right-click on the "GX-100" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject." With macOS Drag the "GX-100" icon to the Trash icon in the Dock. The update process will start. The message "COMPLETE" will appear on the display when the update process completes. Turn the GX-100 power off. Follow the procedure for verifying the version to verify that the version has been updated. Roland Software License Agreement In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages. This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement. 1. GRANT OF LICENSE Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement. (a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE. (b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy. 2. COPYRIGHT The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties. Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland. 3. OTHER RESTRICTIONS (a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo. Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden. (b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions. (c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer. (d) You may not use the Software from multiple locations of a multi-user or networked system at any time. 3.2 Open source software and other third party software (a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc."). (b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License. (c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply. 4. NO WARRANTY Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose. 5. NO LIABILITY Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK. In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors. 6. TERMINATION OF THE LICENSE Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE. 7. GENERAL (a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof. (b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws. I AGREE AND WISH TO PROCEED WITH DOWNLOAD.