GX-10 System Program (Ver.1.06)

HOW TO KNOW THE VERSION
Before you start, check the system program version of your GX-10.
  1. Turn on the power.
  2. The version information appears in the lower right corner of the startup display.
    If this shows the latest version (Version 1.06 or later), there's no need to update your GX-10.
  3. After verifying the displayed version, turn off the power.
UPDATE HISTORY
[ Ver.1.06 ] MAY 2026
Bug Fix
The following bugs were fixed.
  • The effect level of SHIMMER REVERB and SHIMMER DELAY is low.
    (NOTE) Please adjust your memory if it bothers you because the effect level becomes louder if memories you created use these effects.
  • The FILTER MODE parameter sometimes does not affect the sound correctly during memory changes.
[ Ver.1.05 ] MAR 2026
Specification Change
The following specification was changed.
  • The polyphonic tuner function is removed.
Bug Fix
The following bugs were fixed.
  • Fixed to disable OUTPUT SELECT when AMP is disabled.
  • Fixed a bug where ASSIGN did not work when CONTROL MODE was set to BANK/NUM.
  • When ASSIGN's INT PDL TRIGGER is MEM CHANGE, the trigger did not work.
  • Other minor bugs have been fixed.
[ Ver.1.04 ] DEC 2024
Bug Fix
The following bug was fixed.
  • Under certain conditions, Carryover does not work.
[ Ver.1.03 ] NOV 2024
Functionality Improvement
  • Operating stability has been enhanced.
[ Ver.1.02 ] OCT 2024
Functionality Improvement
  • New preset patches have been added in P05-1 through P07-2. Please refer to the[ Parameter Guide ] .
Bug Fixes
The following bugs were fixed.
  • IR loaded on some USER area in SPEAKER TYPE does not sound.
  • Depending on AMP TYPE, noise occurs when switching a memory.
  • Depending on AMP TYPE, SOLO SW sometimes does not work as desired.
WHAT YOU WILL NEED TO UPDATE YOUR GX-10
  • GX-10
  • USB cable
    * The update is carried out with the unit and the computer connected via USB.
    Provide a cable suitable for connection to the computer you're using.
  • Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0
CAUTION WHEN PERFORMING THE UPDATE
  • If you update on the normal mode of GX-10 against the correct procedure, this update data may destroy the system program.
  • Never power-off your GX-10 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the GX-10 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
PROCEDURE FOR THE UPDATE
  1. Hold down [ WRITE ] button and turn on the power.
    * Continue to hold down WRITE until "GX-10 Updater" appears on the display.
  2. Connect the computer to the GX-10's USB port by a USB cable.
  3. Open the "GX-10" drive folder in your personal computer.
    With Windows
    Within My Computer (or Computer), open "GX-10" (or Removable Disk).
    With macOS
    On the desktop, open the "GX-10" icon.
  4. Download the file named "gx10_sys_v106.zip".
    Please open/extract the downloaded "gx10_sys_v106.zip" file on your computer to get the update file in the "gx10_sys_v106" folder.
    Copy (drag and drop) all files in the "gx10_sys_v106" folder into the root directory of the "GX-10" drive.
  5. After the copy has been completed, unmount or remove the drive on your computer.
    With Windows
    Right-click on the "GX-10" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
    With macOS
    Drag the "GX-10" icon to the Trash icon in the Dock.
  6. The update process will start.
  7. The message "COMPLETE" will appear on the display when the update process completes.
  8. Turn the GX-10 power off.
    Follow the procedure for verifying the version to verify that the version has been updated.

Suport

Quick Links