GT-1000CORE System Program ( Ver.2.02 ) HOW TO KNOW THE VERSION Before you start, check the system program version of your GT-1000CORE. While holding down [ EXIT ] button, turn power ON. Continue to hold down EXIT until the GT-1000CORE logo appears on the display. After a short while, the version information appears on the display. If this shows the latest version (Version 2.02 or later), there's no need to update your GT-1000CORE. After verifying the displayed version, turn off the power. UPDATE HISTORY [ Ver.2.02 ] JUL 2026 Additional Functions The following function was added. The parameters are added to PLAY OPTION to disable the function that works when two switches are pressed simultaneously. Bug Fixes The following bugs were fixed. When switching patches without interrupting the sound, noise was produced under certain conditions. (How to avoid this in older versions) This noise does not occur when switching patches with a mute of sound. If you encounter issues such as noise during patch switching, please move the position of the unused block (effect block whose SW is OFF) so that the chain block position does not remain the same in patches before and after the switching. When "MANUAL" is assigned to the built-in switches as CONTROL FUNCTION, it does not work well under certain conditions. (How to avoid this in older versions) Setting ASSIGN SOURCE to a switch other than the built-in switches can avoid this issue. Other minor bugs have been fixed. [ Ver.2.01 ] MAR 2026 Specification Change The following specification was changed. The polyphonic tuner function has been removed. Bug Fixes The following bug was fixed. Fixed the bug in the processing to prevent mute when switching memories. (How to avoid this in older versions) If the conditions of "no block position change occurs on the chain" and "no change of TYPE on the same block" are met, the patch will be switching seamlessly without a mute of sound. In Ver.2.01, a bug was fixed in the conditional judgment section where "do not change TYPE on the same block." If you encounter issues such as noise during patch switching, please move the position of the unused block (effect block whose SW is OFF) so that the chain block position does not remain the same in patches before and after the switching. [ Ver.2.00 ] JUL 2024 Please refer to the "GT-1000CORE Parameter Guide" for detailed information in the [ Owner's Manuals ]. Additional Functions 3 original BOSS high-gain amp types have been added to AIRD PREAMP. X-ULTRA X-OPTIMA X-TITAN * Preset patches that use the added TYPE settings are contained in P201 through P215. For details, refer to "GT-1000CORE Sound List." 6 types of bass amps have been added to AIRD PREAMP. STUDIO BASS SILVER TUBE CLASSIC BLUE SOLID STACK FAT TUBE DARK DRV 2 BOSS distortion types have been added to DISTORTION. SD-1 DS-1 The following 3 models have been added to AIRD OUTPUT SELECT. KATANA-100/212 GEN 3 KATANA-100 GEN 3 KATANA-50 GEN 3 Functionality Improvement You can set time preference in AUTO OFF function at which the power turns off automatically. Bug Fix Minor bugs have been fixed. [ Ver.1.13 ] DEC 2023 Bug Fixes The following bugs were fixed. ASSIGN PC cannot be sent to more than one MIDI channel. When executing INSERT of WRITE function, EFFECT parameters which are added at ver.1.10 become the initial values. When changing the BPM from BTS on the effect edit view, the calculated DELAY TIME is not updated. [ Ver.1.10 ] JAN 2022 Please refer to the "GT-1000CORE Parameter Guide" for detailed information in the [ Owner's Manuals ]. Additional Functions "MASTERING FX," which demonstrates potential for line output, has been added to FX TYPE. Eleven types of settings that combine multiple effects such as multi-band compressor, limiter, enhancer, and equalizer have been provided as TYPE settings. Full-fledged mastering to boost the acoustic pressure of the sound and make sound contours more distinct can now be carried out. The GT-1000CORE is a processor distinguished by a vivid amp sound, but the addition of these effects makes it easy to obtain a line sound having adaptable fighting potential even in recording that demands precise adjustment. We recommend using these with placement after an SP.SIMULATOR. Ten types of SP TYPE settings designed based on IR data having a realistic presence have been added to the SP.SIMULATOR parameters. Ribbon mic and blended dynamic/ribbon mic MIC TYPE settings have been added to the SP.SIMULATOR parameters. Five types of BOSS and Roland delays have been added to the MASTER DELAY parameter. The DD-8's acclaimed WARM and GLITCH settings, the vintage digital SDE-3000, and the still-popular STANDARD and ANALOG parameters featured on the DD-20 have been added. Bug Fixes The following bugs were fixed. ASSIGN values set for an external pedal take effect at startup. The operation of BOSS TONE STUDIO becomes extremely slow due to MIDI IN THRU and USB IN THRU settings. [ Ver.1.03 ] DEC 2021 The version number has been updated due to management-related circumstances. Product specifications are unaffected. [ Ver.1.02 ] NOV 2020 Bug Fixes The following bugs were fixed. Depending on compressor settings, noise sometimes occurs when switching patches. Under certain conditions, ROUTING of DIVIDER fails to work as desired when switching patches. When the [UP] and [DOWN] switches are pressed at the same time at the tuner screen to quit, then on next use, the tuner is set to "Monophonic Tuner." [ Ver.1.01 ] OCT 2020 Bug Fixes The following bugs were fixed. Under certain conditions, VIBRATO fails to work as desired when switching patches. Behavior is not as desired when the STEREO LINK parameter for SP.SIMULATOR is set to OFF. The effect level sometimes rises when CARRYOVER is active. Under particular conditions, the DUCK parameter for REVERB fails to operate as desired when patches are switched. Other minor bugs. WHAT YOU WILL NEED TO UPDATE YOUR GT-1000CORE GT-1000CORE USB cable * The update is carried out with the unit and the computer connected via USB. Provide a cable suitable for connection to the computer you're using. Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 CAUTION WHEN PERFORMING THE UPDATE If you update on the normal mode of GT-1000CORE against the correct procedure, this update data may destroy the system program. Never power-off your GT-1000CORE while the update is in progress! If a power failure or similar accident occurs during the update process, the GT-1000CORE won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs. We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document. PROCEDURE FOR THE UPDATE Hold down [ WRITE ] button and turn on the power. * Continue to hold down WRITE until "GT-1000CORE Updater" appears on the display. Connect the computer to the GT-1000CORE's USB port by a USB cable. Open the "GT-1000CORE" drive folder in your personal computer. With Windows Within My Computer (or Computer), open "GT-1000CORE" (or Removable Disk). With macOS / OS X On the desktop, open the "GT-1000CORE" icon. Download the file named "gt1000core_sys_v202.zip". Please open/extract the downloaded "gt1000core_sys_v202.zip" file on your computer to get the update file in the "gt1000core_sys_v202" folder. Copy (drag and drop) all files in the "gt1000core_sys_v202" folder into the root directory of the "GT-1000CORE" drive. After the copy has been completed, unmount or remove the drive on your computer. With Windows Right-click on the "GT-1000CORE" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject." With macOS / OS X Drag the "GT-1000CORE" icon to the Trash icon in the Dock. Disconnect the USB cable. The message "Execute update ? ([WRITE]: execute)" will appear on the display. Press [ WRITE ] button to start the update process. The message "Update completed. Turn off the GT-1000CORE." will appear on the display when the update process completes. Turn the GT-1000CORE power off. Follow the procedure for verifying the version to verify that the version has been updated. Roland licensavtal för programvara Detta är ett juridiskt avtal mellan dig (en fysisk person eller ett företag) och Roland Corporation (nedan kallat ”Roland”) avseende användningen av denna programvara (nedan kallad ”PROGRAMVARAN”). Läs noga igenom villkoren i detta licensavtal innan du installerar eller använder PROGRAMVARAN. Genom att installera, kopiera eller börja använda PROGRAMVARAN godkänner du härmed villkoren i detta licensavtal. 1. BEVILJANDE AV LICENS Roland beviljar dig följande icke-exklusiva rättigheter att använda PROGRAMVARAN i enlighet med villkoren i detta licensavtal. (a) Du får endast använda PROGRAMVARAN på en specifik dator åt gången. Användning av PROGRAMVARAN innefattar att ladda PROGRAMVARAN till det tillfälliga minnet (dvs. RAM) eller att installera PROGRAMVARAN på lagringsmediet (dvs. hårddisken) på den dator där du kommer att använda PROGRAMVARAN. (b) Du får göra en kopia av PROGRAMVARAN enbart i säkerhetskopieringssyfte (på diskett, magnetooptisk skiva, DAT eller liknande media), men det är förbjudet att göra någon annan kopia. 2. COPYRIGHT PROGRAMVARAN och upphovsrätten till den tillhör Roland och skyddas av alla internationella upphovsrättslagar och fördrag. Därför måste du behandla PROGRAMVARAN på samma sätt som allt annat upphovsrättsskyddat material (t.ex. en bok eller en CD). Alla rättigheter som inte uttryckligen anges här förbehålls Roland. 3. ÖVRIGA BEGRÄNSNINGAR (a) Du får inte modifiera, ändra, bakåtkonstruera, dekompilera eller demontera PROGRAMVARAN samt upphovsrättsmeddelandet och den upphovsrättsskyddade logotypen. Obehörig kopiering, uppladdning till ett annat nätverk, spridning, ändring och/eller införlivande av denna programvara i andra medier eller andra försäljningsartiklar är uttryckligen förbjudet. (b) Du får inte låna ut, hyra ut, leasa, bevilja underlicens för eller överlåta PROGRAMVARAN, varken helt eller delvis, till någon tredje part. Du får dock överlåta PROGRAMVARAN och tillhörande tryckt material permanent, förutsatt att du inte behåller några kopior av programvaran och att mottagaren godkänner villkoren i detta licensavtal. Om PROGRAMVARAN har uppdaterats eller uppgraderats måste varje överlåtelse av PROGRAMVARAN omfatta den senaste uppdateringen och alla tidigare versioner. (c) Om denna PROGRAMVARA innehåller flera olika typer av lagringsmedier (t.ex. disketter och CD-ROM-skivor) och dessa lagringsmedier innehåller samma programvara, får du endast använda det lagringsmedium som är lämpligt för din dator. Du får inte använda de återstående medierna på en annan dator. (d) Du får inte vid något tillfälle använda PROGRAMVARAN från flera platser i ett fleranvändarsystem eller nätverkssystem. (e) PROGRAMVARAN kan använda programvara med öppen källkod och annan programvara från tredje part (”OSS m.m.”). OSS m.m. i detta fall ska omfattas av OSS-licensen m.m. (”OSS-licensen”). Roland kommer att ange vilken öppen källkod (OSS) m.m. som används i företagets produkter på produktsidan, på företagets webbplats eller i bruksanvisningen för produkterna. Du ska granska dessa och följa OSS-licensen. Om det förekommer några skillnader mellan villkoren i detta licensavtal och OSS-licensen, ska OSS-licensen ha företräde och villkoren i detta licensavtal ska inte tillämpas. 4. PROGRAMVARUUPPDATERING AV NÄTVERKSANSLUTNA PRODUKTER Vissa av Rolands produkter kan anslutas till nätverket (nedan kallade ”sådana produkter”). Om sådana produkter är anslutna till ett nätverk kan slutanvändarna ibland ladda ner uppdateringar av PROGRAMVARAN via det anslutna nätverket. Om du väljer att använda denna funktion och ladda ner en uppdatering av PROGRAMVARAN via det anslutna nätverket samt installera sådan PROGRAMVARA i sådana produkter, bekräftar du och samtycker till att tillägg, ändringar eller borttagningar av någon funktion i PROGRAMVARAN kan förekomma till följd av uppdateringen av PROGRAMVARAN. Roland ansvarar inte för förlust eller förändringar av data som uppstår till följd av en uppdatering av PROGRAMVARAN som du har laddat ner och installerat. Du bekräftar vidare och samtycker till att detta licensavtal även ska gälla för den uppdatering av PROGRAMVARAN som du har laddat ner via nätverket och installerat. 5. INGEN GARANTI Roland lämnar inga garantier, varken uttryckliga eller underförstådda, avseende någon programvara, inklusive, men inte begränsat till, underförstådda garantier om säljbarhet eller lämplighet för ett visst ändamål. 6. INGET ANSVAR Roland kan inte besvara frågor som rör detta program för uppdatering av systemprogramvaran. Läs igenom instruktionerna noggrant och observera att du använder PROGRAMVARAN PÅ EGEN RISK. Roland ska under inga omständigheter hållas ansvarigt gentemot slutanvändarna för några som helst skador, inklusive men inte begränsat till ekonomiska skador i form av utebliven vinst eller förlust av information som uppstår till följd av användning av, eller oförmåga att använda, denna produkt. Ovanstående bestämmelse gäller även om Roland har informerats om risken för sådana skador. Även om PROGRAMVARAN innehåller väsentliga, verifierbara och reproducerbara programfel, har Roland inget ansvar för att åtgärda sådana fel. 7. UPPSÄGNING AV LICENSEN Roland förbehåller sig rätten att säga upp detta licensavtal om du inte följer något av villkoren i detta licensavtal. Vid en sådan uppsägning ska du omedelbart upphöra med att använda PROGRAMVARAN. 8. ALLMÄNT (a) Varje bestämmelse i detta avtal som är förbjuden eller inte kan verkställas i någon jurisdiktion ska vara ogiltig i den utsträckning som förbudet eller oförmågan att verkställa gäller, utan att detta påverkar, inskränker eller ogiltigförklarar övriga bestämmelser i avtalet. (b) Roland får, efter eget gottfinnande, när som helst uppdatera dessa villkor. Eventuella ändringar som Roland gör i dessa villkor gäller endast för din användning som sker efter det att Roland har publicerat ändringarna online eller på en lämplig plats. (c) Detta licensavtal ska regleras av och tolkas i enlighet med lagstiftningen i delstaten Kalifornien, utan hänvisning till principerna om lagvalsregler. För EU-länder, Tillverkare: Roland Corporation 1-6-4 Shinmiyakoda, Hamana-ku, Hamamatsu, Shizuoka 431-2103, JAPAN Importör: Roland Europe Group Limited Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire. RG7 4SA Storbritannien Ansvarig person/auktoriserad representant: Roland Central Europe N.V. ENA 23 Zone 1 nr. 1620 Klaus-Michael Kuehnelaan 13, 2440 Geel, BELGIEN För Storbritannien, Tillverkare: Roland Corporation 1-6-4 Shinmiyakoda, Hamana-ku, Hamamatsu, Shizuoka 431-2103, JAPAN Importör: Roland Europe Group Limited Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire. RG7 4SA Storbritannien JAG SAMTYCKER OCH VILL FORTSÄTTA MED NEDLADDNINGEN.