LS-2

Line Selector

LS-2
où acheter

Simplifie votre configuration

Une façon simple d’alterner entre divers effets ou amplificateurs ou d’acheminer des signaux d’entrée et de sortie. Le LS-2 peut alimenter plusieurs pédales BOSS via un seul adaptateur secteur.

Nominal Input Level
-20 dBu
Input Impedance
1 M ohm
Nominal Output Level
-20 dBu
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Bypass
Buffered bypass
Controls
MODE selector switch
LEVEL knobs A/B
Pedal switch
Indicator
Line indicator A/B (Used for indication of check battery)
Connectors
INPUT jack: 1/4-inch phone type
SEND jacks A/B: 1/4-inch phone type
RETURN jacks A/B: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN/OUT jack
Power Supply
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw
30 mA
Expected battery life under continuous use
Carbon: Approx. 14.5 hours
Alkaline: Approx. 29.5 hours
* These figures will vary depending on the actual conditions of use.
Accessories
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22)
Options (sold separately)
AC adaptor: PSA series
Parallel DC Cord: PCS-20A
Size and Weight
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight (including battery)
430 g
1 lb
* 0 dBu = 0.775 Vrms
*The specifications are subject to change without notice.

Support

Si vous avez des questions sur l’utilisation de votre produit Roland, veuillez consulter notre base de connaissances pour obtenir les réponses aux questions les plus courantes.
Vous pouvez également contacter notre service d’assistance technique par courriel.
De plus, nous disposons d'une bibliothèque de manuels d'utilisation et de documents d'assistance que vous pouvez télécharger et consulter.

Mode d'emploi

Documents supplémentaires